芯耀
28
在前幾天的 Green Car Congress 的報道里面，有一則寶馬在設計在優化快充條件下的熱管理的主意的報道，是值得一讀的。面向下一代熱管理，核心的問題在于考慮在快充階段的發熱（面向快充的 200-300kW），在車輛停置條件下，把大量的熱量散出去
備注:之前的熱管理主要以放電為主，沒有把充電的要求作為獨立的分支，因?yàn)樯崃恳膊淮?/div>
BMW is seeking alternative cooling technologies for vehicle batteries to further improve peak cooling capacity during fast charging while reducing cooling components’ vibration and noise emission.Faster charging creates more heat to be dissipated within a short period of time.
現有方案和缺點：使用冷媒直冷的方案在快充條件下的噪聲比較大
Current technologies use electric refrigerant compressors.Rising cooling capacities would generate significantly higher vibrations through fans and other moving components. The thus generated acoustic emissions during faster charging would need sophisticated damping measures to allow pleasant circumstances for people and the surrounding environment.
For example, if you are having a conversation in a charging car, noise above 25 dB(A) is considered uncomfortable. If you are standing close to a charging car, noise from the HVAC System including the radiator above 35 dB(A) is perceived as discomfort.
寶馬的考慮的要求包括：
冷卻技術主要針對的是把電池表面的溫度導熱到外部去，溫度范圍涉及到 -20 至 45°
Cooling technology working with temperature gradients between battery surface and ambient temperature, operating temperature range -20 °C to +45 °C.
Scalable for future battery capacities and heat dissipation. As a starting point for the challenge, solutions should assume needing a cooling power > 20 kW during the fast charging with 200-300 kW.
Low noise production, not beyond 35 dB(A).
Power density: realizable thermal performance compared to the component volume.
Peak cooling performance is not required 24/7. Instead the proposed solution has to operate only within the limited time period of fast charging.
The vehicle will not be moving while charging, so there is no circulating air for cooling available. The heat flux to ambient air must also be implemented by the system.
也給出了一些技術的方向：
Magnetocaloric technologies
Electrochemical cooling
Schukey machine applications
Thermoacoustic cooling
Absorption cooling
The use of phase change materials (vapor cooling)
Innovative compression methods
Cooling medium is not specified
BMW will not consider passsive cooling technologies requiring high temperature gradients between battery surface and ambient temperature（這里的意思是很堅決）technologies harmful to the environment, or technologies with high service and maintenance requirements.
根據前端時間倪總他們的測試，350A 的情況下，充電接口溫升 20 攝氏度，在當前的電池溫升就成了個瓶頸，在 350Ah 流過電池，這些熱量咋辦。
摘錄自倪總的朋友圈
小結：隨著充電接口的問題解決，電池的瓶頸特別是電池的散熱作為一個課題會獨立的出來。
閱讀全文
版權聲明：與非網經原作者授權轉載，版權屬于原作者。文章觀點僅代表作者本人，不代表與非網立場。文章及其配圖僅供工程師學習之用，如有侵權或者其他問題，請聯系本站作侵刪。
侵權投訴
人工客服
（售后/吐槽/合作/交友）
人工客服（售后/吐槽/合作/交友）
寶馬集團是全世界成功的汽車和摩托車制造商之一，旗下?lián)碛蠦MW、MINI和Rolls-Royce三大品牌；同時提供汽車金融和高檔出行服務。作為一家全球性公司，寶馬集團在14個國家擁有31家生產和組裝廠，銷售網絡遍及140多個國家和地區。
寶馬集團是全世界成功的汽車和摩托車制造商之一，旗下?lián)碛蠦MW、MINI和Rolls-Royce三大品牌；同時提供汽車金融和高檔出行服務。作為一家全球性公司，寶馬集團在14個國家擁有31家生產和組裝廠，銷售網絡遍及140多個國家和地區。收起
查看更多相關推薦
- IP2368:最大充放電功率100W、支持多種快充協議、支持 2~6 節串聯（原理圖+DEMO板）
-
- 無線充電解決方案，采用無線充電管理芯片CH246和無線充電專用MCU CH641
- 20W氮化鎵充電器，采用誠芯微CX75GD080BL+CX7538BS高集成開關電源方案
- 120W雙口車載充電器內置CX8836，能給座椅加熱
- XSP16多協議取電芯片可通過串口發送電壓電流信息供外部單片機讀取，支持最大取電電壓28V
- IP5569 支持 3 路 Type-C、PD3.0 等快充協議，自喚醒 15W無線充 TX 等功能
- 基于CX1342為主控的120W多口多功能氮化鎵充電器方案開發
